03 9387 1077

1B Cross Street, Brunswick East VIC 3057

JOINTING COMPOUND, BUS BAR, BOLTED CU & AL JOINTS, WHITE, 200G DISPENSER

EJC/300
JOINTING COMPOUND, BUS BAR, BOLTED CU & AL JOINTS, WHITE, 200G DISPENSER
All aluminium joints, both bolted and crimped should have jointing compound applied to the joint, where it is not pre-loaded in the barrel of the lug or link. There are three grades of aluminium compound available supplied in handy plastic squeeze tubes to facilitate application. All of the compounds stay stable at high temperatures, and do not run out of the joint. EJC/300 white jointing compound is recommended for copper and aluminium bolted connections. The compound is made from a mineral oil base with 10% fumed silica. The compound fills voids left after bolting and should be applied after scratch brushing both aluminium mating surfaces to remove any oxide. Please Note: Jointing compounds are made from a non-conductive oil base with suspended particles to suit a particular application. Each compound has specific properties and should only be used as prescribed by the manufacturer for its specific application. If in doubt about the application of a compound, please contact us for assistance.

Need help with this product?

Our team can help with specifications, standards and availability.

Call 03 9387 1077 or send us a message.

Features
• Aluminium joints (bolted and crimped) should have jointing compound applied to joint where it is not pre-loaded in the barrels of lugs or links • For copper to copper or aluminium to aluminium bolted connections • Fills voids left after bolting • Handy plastic squeeze tubes - easy application • Scratch brush aluminium before applying compound

Similar products