03 9387 1077

1B Cross Street, Brunswick East VIC 3057

DISCONNECTOR, SAFETY SERVICE DISCONNECTOR TO SUIT ABC CONDUCTOR TO SUIT 2X25MM, 1.9KN

SSD-2X25AL19
Fully Insulated Body The PLP SSD™ is manufactured from UV stabilised and fibre reinforced nylon which provides the fitting with complete insulating and mechanically strong features. All Components All components are held captive within the body so there are no loose parts to fall to ground when installing or upon activation. No Requirement For On-Site Setting The product is pre-set to the required breaking load in the factory. The setting arrangement for the load is totally tamper proof. Only Activates on Impact Above A Specified Load The PLP SSD™ will only activate if a load is applied of approximately 1.9 kN. The SSD™ will not activate simply due to an increase of tension to the cable such as possum walking along the service. Accurate and reliable failure is guaranteed by the shear pin being specifically sized to the failure load. Can Be Installed Within 5 Minutes Due to the simple nature of the design of the product, it is easily installed within 5 minutes. Simply place the cable into the clamp and push it into the slots along the body, tighten the nuts on the bolted clamp till secure and bring the bridle around, clip it onto the bollard and snap the cover in place. Installation is now complete! No special equipment is required. No Need to Disconnect Customer’s Supply To install the PLP SSD™, there is no need to disconnect the costumer’s supply because the conductor is not severed to install plugs or sockets. Therefore, the installation of the SSD™ can be done at any time, night or day, without having to advise customers - there is no disruption at all! No Possibility of Service Failure Due To Poor Contact There are no active electrical components within the SSD™ (such as contacts) which eliminates the possibility of an electrical breakdown or hot joints.

Need help with this product?

Our team can help with specifications, standards and availability.

Call 03 9387 1077 or send us a message.

Similar products